基于方位角变化率的快速高精度无源定位方法

在分析现有单站无源定位方法优缺点的基础上,根据运动平台对固定目标无源定位技术的特点,提出了一种通过方位角变化率信息对观测站与目标间距离进行解算的快速高精度无源定位方法。并通过仿真,验证了该方法是一种高精度、快速的定位方法,具有较强的通用性。其主要应用于机载无源探测设备对地面固定雷达站或其他辐射源定位,从而为引导导弹对其攻击提供必要的数据。     

基于EPA标准的HVP型阀门定位器开发

我国拥有自主知识产权的工业以态网总线标准EPA在推广应用中面临缺乏足够现场设备支持的困境.针对现状,在现有HVP型智能阀门定位器的基础上,采用双CPU方案,开发符合EPA通信协议要求的智能阀门定位器.给出了EPA阀门定位器开发的总体方案、硬件设计和软件设计,开发的阀门定位器通过EPA一致性、互可操作性测试以及产品全功能...     

基于转速控制的电传动车辆动力分配策略

为解决电传动车辆行驶过程中的动力分配问题,在车辆整体方案设计的基础上,对驾驶员操作指令进行合理的解析,并提出了一种基于＂转速控制＂方式的动力分配控制策略,通过对左、右侧驱动电机进行转速控制给定,实现车辆在各种复杂工况下的正常行驶,最后进行了系统建模和仿真。结果表明：基于该动力分配控制策略,车辆可实现稳定直驶、任意半径转向、中心转向以及电气制动等工况要求,并且具有良好的动力性能。     

海警刑事执法存在的问题及对策研究

自2007年《公安机关海上执法工作规定》正式实施以来,公安海警部队已成为打击海上违法犯罪活动,维护海上治安秩序的重要力量。但是,由于海警部队承接海上案件侦查工作时间尚短,经验不足,执法工作仍存在许多问题,已严重影响了海警部队海上刑事执法工作的正常开展。以海警部队海上刑事执法实践中所暴露出的问题为切入点,深刻剖析产生这些问题的原因,并进而提出解决问题的思路与对策,以期对海警部队的海上刑事执法工作提供一定的理论参考,使海警部队在维护我国海洋秩序中发挥更为重要的作用。     

电缆线端面火蔓延速率估算

根据某化工厂火灾现场勘验结果,运用火灾事故调查方法,推断火灾事故发生的原因。在分析电缆起火原因时,引用计算火蔓延速率的半经验公式,并且根据实际对公式的参数进行修订,对高压电缆火灾的蔓延时间进行理论上的推导,最后用火灾实际发生时间来检验计算结果,以进一步佐证火灾原因调查的正确性。     

含脉冲负载的综合电力系统储能优化配置研究

考虑到舰船环境限制和高能脉冲负载对储能的需求,有必要对储能装置进行合理的选型和优化配置,来提升综合电力系统性能。为此,基于带权极小模理想点法和层次分析法,提出了一种储能装置性能评价函数,并以其为优化目标,进行储能装置优化配置。所提出的评价函数充分考虑系统需求和脉冲负载特性,以储能装置体积、质量和经济性作为评价函数主要组成部分,同时考虑功率、能量、电压、荷电状态等约束,建立优化配置模型,并采用差分进化算法进行求解。以高性能锂电池和超级电容器为例,对所提模型进行求解计算,结果表明在所给权重系数下锂电池性能更优,更适用于综合电力系统,并给出了优化配置后的指导方案。     

Thermal hazard assessment of TKX-50-based melt-cast explosive

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based melt-cast explosives were comparatively studied through accelerating rate calorimeter (ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions (HWS mode) and constant heating (CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cook-off experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

交直流电网的绝缘状态分析

提供了交直流混合网络在交流侧、直流侧绝缘降低时,描述电网主电路和零序电流的数学模型;分析计算了交直流混合网络的绝缘降低引起的主电路零序电流的变化情况．理论分析的结果与试验结果吻合．为设计制造交直流混合网络的绝缘监测系统提供了可靠的依据     

高斯定理及安培环路定理的严格证明

在电磁学中,库仑定律和比奥—萨伐尔定律是基本定律,而高斯定理和安培环路定理实用性更强,应用更方便。在一般教科书中,这两个定理(律)的推导都是先取特例,然后再推广到一般情况。本文用数学方法从库仑定律和比奥—萨伐尔定律直接导出这两个定律。